|
 |
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
|
 |
|
 |
 |
 |
 |
 |
 |
 |
|
IQ Connect Translators
| |
NTCIP for Legacy Hardware
Peek Traffic has created the IQ Connect
translators to enable older traffic hardware to
communicate with Peek’s NTCIP central system
software, IQ Central®. IQ Connect is available
either as a standalone unit to be attached to your
hardware via a cable, or as a plug-in card
(available for the 3000E controller.)
This unique solution provides a variety of
methods to connect your legacy hardware to the
IQ Central central system, including high speed
direct serial connections, a variety of serial
modem options (including radio modems), as
well as 100 Base-T Ethernet connections.
|
|
 |
| |
Supported Hardware
Intersection Masters
- Multisonics OSAM-32
- Peek M3000E
- Traconex TMM 500
- Transyt 3800EL
Intersection Controllers
- Multisonics 820A OSAM
- Peek 3000 and 3000E
- Peek/TCT LMD 9200
- Traconex 390CJ
- Transyt 1880EL
|
|
Controllers can be controlled and programmed
from the central software either as isolated
local units, or through a master
controller’s connections to the
local intersection devices. This
includes status monitoring, central
overrides, preemptions, log
retrieval, and all other central
command options that are
available for each make and
model of controller device. The
exact capabilities available from
central are determined by the
capabilities of the controller unit, not any
limitations of the IQ Connect translator. |
| |
Features
- Enables full NTCIP communications between
non-NTCIP speaking hardware and Peek’s
IQ Central package
- High-speed serial connection to older
hardware
- Functions as an Ethernet gateway for older
hardware (100Base-T) that have no other
Ethernet option available
- Ethernet Link and Ethernet Active LEDs
- Firmware updates via flashable memory
- Battery backed SRAM
- Compatible with daughter COMMS boards
- High speed Rabbit 3000 processor
- Initialization and Heartbeat LEDs
- Supports connections to central via external
dialup modem, with automatic initialization of
the modem
- Device and Central COMMS activity LEDs
- Local serial port (RJ-11) for direct local
computer interfacing
- Local reset button available from the front
panel
- Device ID set from front panel DIP switches
- Pigtail to connect to DC power included
(a separate AC power supply can be ordered)
|
|
Additional Information:
|
| |
|
|
|
  |
|
 |
|
 |
 |
|
 |
 |
 |
|
| |
