Peek Traffic Corporation Contact Us Careers
Traffic Signal
Home About Us Products Support Locate Distributors News & Events Product Literature
U.S. Traffic Model 326 Detectors
 
 

The Model 326 detector is U.S. Traffic's well trusted single channel inductive loop vehicle detector. It is compatible with all radio control and remote openers.

Features

  • Features latest state-of-the-art surface
    mount technology
  • Sensitivity Boost, selectable by setting an external DIP switch, eliminates possible detector dropout during passage of high bed vehicles - this feature is particularly useful in sliding gate
    situations.
  • External rotary switch for 10 selectable sensitivity levels
  • Two color LED status indicator for Detect, Power, and Loop Fault indication.
  • Self-tuning & complete environmental tracking
  • No warm-up required
  • Continuous Winky-Blinkā„¢ loop monitor, meaning it
    remembers and indicates intermittent and failed loops - a great troubleshooting aid.
  • If intermittent or failed loops self-heal, the detector will resume normal operation without manually resetting the detector
  • Four front panel selectable loop frequencies permit elimination of crosstalk
  • Large loop inductance range: 20 to 2000 microhenries, allowing operation with a wide range of loops
  • 11-pin Amphenol rear connector
  • Two separate output relays:
    • Output A is presence output
    • Output B, programmable with external DIP switches, provides presence, pulse on entry, pulse on exit, or fail output
  • An infinite presence mode is available by setting an external DIP switch
  • Both outputs can be delayed for 2 seconds, by setting an external DIP switch, causing the detector to ignore vehicles passing over the loop faster than about 5 miles per hour
  • Both outputs can be extended for 0 seconds, 2 seconds, 5 seconds, or 10 seconds, programmable with external DIP switches
  • Detector will not retune if power is lost for a minimum of 3 seconds and then restored. Prevents vehicle detection from being lost during brief power interruptions
  • ABS plastic case
  • LV Series - Universal Low Voltage Input, accepts 12V to 24V AC or DC, Failsafe or Failsecure.
  • Standard Series - Models available in 120 VAC or 240 VAC, failsafe and failsecure.

 

 

326 Detector

(Model 326-SFLV-7 Detector, click to enlarge)


Ordering Information

Model Description
326-3 120VAC, Failsecure
326SFLV-7 12-24VAC, Failsafe
326-8 240VAC, Failsecure
326-9 120VAC, Failsecure, alternate pin assignments
326-19 240VAC, Failsecure, alternate pin assignments
326-38 240VAC, Failsecure, connector key is DOWN

Additional Information

For information about Peek's Detector product line,
please contact our Sales Team.





       
       
326 Detector Logo
120 Years of Traffic Equipment Innovation
Email Privacy Statement Site Map