200 Load Switch

Features & Benefits

• Floating-point connector 
• High-visibility - HiBright LED indicators 
• 500 volt components 
• Zero cross-switching 
• Optional solid state relays 

Dependability.  It's what you get every time you install a Model 200 load switch.  Sure it's a simple concept - but after 25 years in the industry, we know what's important. 

For example, we gave the Model 200 zero cross-switching, because we know it provides reliable, trouble-free performance.  (And it helps lamps last longer, too.)  We also gave our switch a durable case to protect it from the elements, so you can count on it for years. 

To prove Model 200 is working in the field, we mounted HiBright LED's right on the front panel.  They provide an active circuit display that's visible from any cabinet angle, even in direct sunlight. 

Finally, our experience tells us that not everyone has the same system. So we offer the Model 200 in six different ways - with  discrete components or the easy-to-service modular solid state relays, with card guides and input/output indicators. 

Specifications

Electrical Specifications 

Power requirements: 
Operating line voltage:  50-135 VAC RMS 
Operating line frequency:  50-60 Hz 
DC power supply voltage:  +24, ±2 VDC 

Input characteristics (referenced to +24V source): 

Turn-on minimum:   6 VDC 
Turn-off maximum:  16 VDC 
Input current maximum:   20 mA DC 
*(Inputs are reverse polarity protected) 

Output characteristics (per NEMA TS-2, 1992): 

Load current:  25 Amperes AC 
Stand-off voltage (peak):  500 VAC 
Off-state leakage current (max):  7 mA AC 
DV/DT (minimum):  100 V/ms 
Power factor (minimum):  0.8 
Minimum load current:  50 mA AC 
1 second surge current:  40 Amperes 
1 cycle surge current:  175 Amperes 

Isolation voltage:  >2000V 

Operating temperature:  -37° C to +75° C  -34° F to +167° F 

Humidity range:  0 to 95% (relative)

Dimensions (meets NEMA TS-2, 1992): 

Height:  4.00 inches,   10.16 cm 

Width: 1.69 inches,   4.29 cm 

Depth:  8.20 inches,   20.82 cm 

Connector:   mates with Cinch-Jones,   type S-241 SB socket 

Pin configuration:   per NEMA Standard,   TS-2, 1992, Section 6 

Model 200K

Features D1225 modular solid state relays 

Load Switch Selection Guide

Return to Cabinets Products